News:

Welcome Rad Power Bike owners!

Buying a Rad Power Bike? Support the forum and use my affiliate link: https://radpowerbikes.pxf.io/Wq1EzZ

Be sure to sign up for a free account to see posted images.

Note: To help support to ongoing costs of running
the site we use Amazon affiliate links.

Main Menu

Finally made a CHAIN GUARD for my RadRunner Gen I

Started by NorthParkRad, April 11, 2024, 05:20:41 PM

Previous topic - Next topic Support the rad owners forum

NorthParkRad

Tired of ruining my cuffs with black chain grease. I do use bike cuff clips (get those on eBay), but they are not always effective. So I finally made a chain guard for my RadRunner Gen I.
You'll need a saber saw with a metal cutting blade, and a good gauge cookie sheet works well for the metal. I folded it along the top edge, and along the wide end where it is bolted to the frame to give it needed double-thickness extra strength. I used the two existing holes on the frame to secure it with bolts. There is just the right amount of space between the pedal and the chain, so it does not scrape the guard (final photo).
Here it is:








John Rose

Does the forward end just float there? It should be easy to fabricate a brace to the down tube.
RadMini ST 2 / RadExpand 5

NorthParkRad

Yes, it just floats there. And of course that was a concern, and the reason why I folded the metal for reinforcement. It's surprisingly stable though. The down tube is maybe 6" away, but I suppose a brace connected to it could be installed. So far, I see no need to.

Kudsooy

Nice! Would mind sharing the dimensions? I have fabricated another solution but yours looks way better!


John Rose

Quote from: NorthParkRad on April 11, 2024, 05:20:41 PM... a good gauge cookie sheet works well for the metal. ...
Ah, yes.
If you buy a new-ish second-hand one from a thrift store it'll (A) be cheap, and (B) have a nice Teflon coating that will shed water and mud.
RadMini ST 2 / RadExpand 5

Support the rad owners forum